CNC Cut Acrylic, Laser Cutting & Routing
Router and laser under one roof. Laser cut acrylic with polished edges, routed and carved wood, shaped aluminium composite, PVC and Lexan — all cut here in Rosenberg. Serving Fort Bend, Brazoria, Wharton and Matagorda Counties.
- In business since 1976
- Locally owned
- Router & laser in house
- Acrylic, wood, composite, PVC
- Four counties served
Two machines, because one is not enough
We run a CNC router and a laser, and they do genuinely different jobs. The router removes material with a spinning cutter, which is what you want for depth — carved wood, dimensional lettering, thick aluminium composite. The laser cuts with a focused beam, which is what you want for acrylic, because it seals the edge as it cuts and leaves a polished finish with no sanding or flame-polishing afterwards.
Most shops in this region have one or the other and quietly steer you toward whatever theirs does well. We will tell you which machine your job wants and why.
Everything is cut here in Rosenberg. Nothing goes out to a trade supplier and comes back a week later.
What we cut
Acrylic Letters & Logos
Laser cut lettering and logos in clear, frosted, coloured and mirrored acrylic. Polished edges straight off the machine.
Routed & Carved Wood
Carved and routed wood signs with real depth. Ranch entrances, business signs and rustic work. See custom wood signs.
Shaped Panels
Aluminium composite, PVC and Lexan cut to any outline rather than a rectangle. See aluminum sign panels.
Stand-Off Logo Signs
Cut acrylic or metal-faced logos mounted proud of the wall on stand-offs. See lobby signs.
Layered & Stacked Work
Multiple cut layers built up for depth and shadow — logos, plaques and feature pieces.
Print & Cut
Printed full colour, laminated, then cut to silhouette. Shaped displays, props and point-of-sale.
Router or laser?
You do not need to know before you call, but it explains why some jobs cost what they do and why some materials are a bad idea on the wrong machine.
Laser cutting
- Acrylic, above all — polished edge, no finishing
- Intricate detail and tight interior contours
- Engraving on wood and thin substrates
- Fast on fine work, clean with no post-processing
- Not for thick aluminium or deep carving
CNC routing
- Wood, aluminium composite, PVC, Lexan, foam
- Depth — carving, stepped relief, dimension
- Large panels and heavier stock
- Built-up and layered lettering
- Edges need finishing on some materials
What we need from you
Vector artwork cuts cleanly — .ai, .eps, .svg, .dxf or a PDF with live vectors. A logo saved as a JPEG has no outline for a machine to follow, so it has to be redrawn first, which is a real cost worth knowing about before you are surprised by it.
If all you have is a photograph or a scan, send it anyway. Redrawing is routine and often quick. We would rather quote it honestly up front than pretend it is free.
Tell us the material, the finished size, the quantity and whether it mounts flush or on stand-offs. That is usually enough to price it.
How a cutting job runs
Artwork check
We look at what you have sent and tell you whether it cuts as-is or needs redrawing.
Material & machine
Router or laser, and which substrate. This is where cost is decided.
Cut
Run here in Rosenberg. Acrylic comes off the laser polished; routed work is finished as needed.
Finish or install
Collected, packed, or installed — including stand-off mounting across the four counties.
Cutting for the whole region
Businesses across Rosenberg, Richmond, Sugar Land, Missouri City, Katy and Stafford use us for reception logos, cut lettering and shaped panels. Further out through El Campo, Wharton, Bay City and Manvel, routed wood is the more common ask — ranch entrances, gate signs and property identification.
We also cut for other trades. If you are a fabricator, builder or designer needing parts cut rather than a finished sign, that is a normal order here.
Common questions
What is the difference between CNC routing and laser cutting?
A router physically removes material with a spinning cutter, which suits depth, carving and heavier stock like wood and aluminium composite. A laser cuts with a focused beam and is best on acrylic, where it seals the edge as it cuts and leaves a polished finish that needs no further work.
What thickness of acrylic can you cut?
A wide range of standard sheet thicknesses, in clear, frosted, coloured and mirrored. Tell us the finished size and how it mounts and we will advise the thickness — larger letters generally need thicker stock to stay flat.
What file format do you need?
Vector artwork cuts directly: .ai, .eps, .svg, .dxf, or a PDF with live vectors. A JPEG or PNG has no outline for the machine to follow and has to be redrawn first, which we will quote separately rather than hide.
Can you cut metal?
We cut aluminium composite panel, which is aluminium skins over a solid core, and that covers most sign applications. Solid plate metal cutting is not something we do in house.
Do you cut parts for other trades?
Yes. Fabricators, builders and designers regularly send us cut lists for parts rather than finished signs. Send the vector files and material and we will quote it.
Can you mount cut letters on stand-offs?
Yes, and we install across the four counties we serve. Stand-off mounting holds the letters proud of the wall so they cast a shadow, which is what gives a reception sign its depth.
Visit the shop
Intrepid Signs1700 Walger Ave, Ste E
Rosenberg, TX 77471
281-232-5262
info@intrepidsigns.com
Hours
Monday – Thursday: 9:00 AM – 5:00 PM
Friday – Sunday: Closed
Serving
Fort Bend, Brazoria, Wharton and Matagorda Counties.
Need something cut?
Send the artwork, the material and the size. We will tell you which machine it wants and what it costs.