In business since 1976
Pole & Pylon Signs
Faces, tenant panels and flex face replacement for pole and pylon cabinets across Fort Bend, Brazoria, Wharton and Matagorda Counties. Printed and fitted from Rosenberg.
- In business since 1976
- Locally owned
- Printed & laminated in house
- Four counties served
- Rosenberg, Texas
Usually the structure is fine
A pole sign that looks finished is rarely finished. The steel is good for decades. What fails is the face — brittle, chalky, faded to a pastel version of the original, or listing a tenant who left two years ago.
Replacing the face costs a fraction of replacing the cabinet, and a small fraction of putting up a new structure. Before anybody quotes you a new pylon, it is worth finding out whether you need one.
Send us a photo of the sign and the cabinet dimensions and we will tell you which job you are actually looking at.
What we do

Flex Face Replacement
Heavy translucent vinyl printed as one continuous face and tensioned into the frame. No panel joints across the face, lighter than a rigid sheet, and replaceable without touching the structure. This is the job a national online printer cannot do — the face has to be measured to your cabinet and fitted to it. See custom banners.

Multi-Tenant Panels
Individual tenant panels for retail centers and office parks. Printed to the center’s existing standard so a new tenant panel matches the ones already up, rather than announcing itself as the replacement.

Rigid Face Panels
Printed and laminated aluminum, composite, acrylic or Lexan faces where the cabinet takes a rigid sheet rather than a tensioned face. Cut to the frame and finished here. See aluminum sign panels.

Fitting & Service
We fit faces and panels on site with a lift. Electrical work on lit cabinets is coordinated with a licensed electrician rather than carried out in house — the sign is ours, the supply is theirs, and we arrange it.
We also make monument signs: entrance signs for offices, churches, subdivisions and ranch gates, with faces made in our Rosenberg shop.
Flex face or rigid panel?
Which one your cabinet takes is decided by the frame, not by preference. Send the dimensions and a photo and we will tell you.
Flex Face
Large cabinets with a tensioning frame. One continuous face with no joints, lighter, and replaceable without altering the structure. The usual answer on a big pylon.
Rigid Panel
Smaller cabinets and retainer frames that hold a sheet. Printed and laminated aluminum, composite or acrylic. Sturdier at smaller sizes, impractical at large ones.
Tenant Panel
Multi-tenant pylons where only one slot changes. Matched to the center’s existing panel standard so the sign stays consistent.
What a faded face is costing you
A pylon sign is the one piece of signage people read at forty miles an hour. When the face has gone chalky it does not read as a business that is doing well.
It is also the cheapest large sign to refresh. The structure, the footing and the cabinet all stay. You are buying a printed face and a fitting visit, not a new sign.
Pricing for printed panels is published rather than quoted case by case — see the price guide. Flex faces are quoted to the cabinet because every frame is different.

How a face replacement runs
Photo & dimensions
We need the cabinet or frame size, not the sign’s overall height. A photo of the structure helps.
Face type
We tell you whether the frame takes a flex face or a rigid panel, and quote it.
Printed here
Printed and laminated in Rosenberg, seamed or cut to the frame.
Fitted on site
Old face out, new face tensioned or retained. Usually a single visit.
Common questions
What is a flex face?
A flexible translucent vinyl sign face, printed as one continuous piece and tensioned into a pole or pylon cabinet’s frame. Because there are no panel joints it reads cleanly at distance, and it can be replaced without altering the cabinet or the structure.
Do I need a whole new sign, or just a face?
Almost always just a face. The steel and the footing outlast the face by decades. If the cabinet is sound and the frame is intact, replacing the face costs a fraction of replacing the sign. Send a photo and we will tell you honestly which you are looking at.
What measurements do you need?
The cabinet or frame opening, not the overall sign height. If you cannot safely measure it, send photos with something of known size in frame and we will work from that, then confirm on site before printing.
Can you change one tenant panel on a multi-tenant pylon?
Yes, and it is common. We match the center’s existing panel standard so the new one does not stand out against the others. Bring the panel size and a photo of the sign.
Do you do the electrical work on lit signs?
No. We fabricate, print and fit the face. Electrical work is coordinated with a licensed electrician. We arrange it as part of the job rather than leaving you to find someone.
How long does a face last?
A printed and laminated face holds up for years in Texas sun. The ones that go chalky inside a season are usually unlaminated, or UV printed direct rather than printed and laminated.
Visit the shop
Intrepid Signs1700 Walger Ave Ste E
Rosenberg, TX 77471
281-232-5262
info@intrepidsigns.com
Hours
Monday to Thursday, 9am to 5pm
Closed Friday, Saturday and Sunday
Serving
Fort Bend, Brazoria, Wharton and Matagorda Counties — Rosenberg, Richmond, Katy, Sugar Land, Missouri City, Fulshear, Stafford, Wharton, El Campo and Bay City.
Send a photo of the sign
We will tell you whether you need a face, a panel or a new cabinet — and we will say so even when the cheaper answer is the right one.